VISSONIC VIS-DCD-T DELEGATE WIRED DISCUSSION
CAT5 digital discussion Delegate unit
Glass surface with touch buttons and OLED screen
Connecting headphones from 2 sides of the microphone with volume control
Built-in linear interface to connect any peripheral device.
Fully digital transmission and signal processing with protection against cell phone interference
Support for interchangeable gooseneck microphones.
On-screen performance timer
Meets standards IEC 60914, GBT 15381-94
2 RJ-45 ports for twisted pair cable connection Cat 5 / 5e / 6 to the central controller VIS-DCP2000-D
64-channel digital data and audio bus with “red ring” technology
Zero delay in the transmission of audio.
Automatic assignment of device ID in the system.
Hot plug and identification of remote controls (Hot-swap)
2 3.5 audio connectors for headphones
1 touch button MIC ON / OFF with LED activity indicator
2 volume control buttons on the audio channel
OLED screen with a resolution of 128×32 pixels.
Sampling frequency 48 000 Hz
Frequency response 20-20000 Hz.
Sensitivity -46 dBV / Pa
S / N ratio 70 dB
Maximum sound pressure 125 dB (SOI <3%)
Maximum consumption 2 watts.
Ear resistance 16 ohms
Input resistance 3.5 2 kΩ
Weight 1.1 kg
The dimensions of the console (W x D x H): 185 x 130 x 50 mm (without a gooseneck microphone)
*GOOSENECK MICROPHONE NOT INCLUDED)
The unique AUDIO-LINK digital ring network technology achieve full-digital signal transmission and processing, completely avoid the RF interference from cell phone or similar devices.
One CATSe cable to t ransmit 64 channel audio and other signals
The main engine and power expansion device without fan design, ensure no fan noise; unit touch button design, let the switch microphone no longer produce noise
High fidelity sound by zero loss audio transmit technology, 48K audio sampling frequency, 20Hz-20KHz response frequency
"Hand-in-Hand-Loop-Network" connection makes the system always working perfectly no matter changing discussion unit or having any malfunctioned units
This system assigned to each unit independently ID to avoid duplicate ID conflict
The sensitivity of the unit microphone and t he 16 segment equalizer EQ can be independently regulated
Support AGC(Automatic Gain Control)/AFC(Adaptive Feedback Cancellation)/ANC(Actitechnologyve Noise Control )/Mix (AutoMix)
|Maximum Power Dissipation||2.0W|
|Total Harmonic Distortion(THD)||<0.1%|
|Load Impedance||>160 <1kΩ|
|Headphone output power||25mW|
|Rated microphone input||>70dB|
|SPLMaximum microphone input||>100dB|
|SPL Loudspeaker rated output||>70dB|
|SPL at O.5mSensitivity||-46 dBV/Pa|
|Connection||CAT5 I CAT6 cable+ snap|
|Display||OLED display 128 x 32|
|Dimensions (mm)||185W x 130D x50H|