4 lateral inserts, two upper and two lower points designed to accept quick release pins or M10 screws, two rear M6 suspension points.
New hardware for flying installations, for ground setups, and the possibility of coupling two or more CLA 406.2A / CLA 206A with an angle of 0°-20° in 5° steps vertically,
all with optional quick release pins for touring.
35mm stand socket
Frequency response (@-6dB):65Hz - 20KHz
Dispersion: 100 ° x 25 °
DSP: 8 preset
Built-in switched mode power supply
Control panel with volume, presets, HP filter, mic/ line, status LED
The system can be used both in point source systems with the VERTUS CLA118SA sub and in vertical clusters, with the CLA206A down-fill.
Configuration | |
Built-in amplifier rms/peak LF | |
Built-in amplifier rms/peak HF | |
LF / HF (inch) | 4x6.5- 1.5 coil / |
Frequency response (@-6dB) | |
SPLmax cont/peak | |
DSP presets | |
Dispersion | |
Input impedance (kOhm) | |
Housing | 12mm (1/2”) birch plywood with scra |
Rigging | Tripod or wall mountable / 12 attachment points above and below for the optional hardware that allows hanging or 2 pairs of CLA406A with angle of 0° |
Control Panel | volume, presets, HP fi |
Input connectors | Neutrik powerCO |
Dimensions(mm) | |
Weight(kg) | |